[fluxus] gentoo jackd nogo

[Dave Griffiths]

looks like jack is chucking out fluxus after the connection to "" fails.
try getting your call to (start-audio) to connect to a jack port - is that
in your .fluxus.scm file? also make sure the buffer and samplerate
settings match jack's

cheers,

dave

> as far as i understand it is working, have you tried using qjackctl to
> check input/output ports?
>
> On Wed, 2006-09-06 at 23:13 +0200, ad al wrote:
>> hola!
>>
>> trying here to use the latest version of this beloved software ;) but i
>> have some problem with jack but im not sure what to do:
>>
>> localhost XXXX #  jackd -d alsa &
>> [1] 7133
>> jackd 0.99.0
>> Copyright 2001-2003 Paul Davis and others.
>> jackd comes with ABSOLUTELY NO WARRANTY
>> This is free software, and you are welcome to redistribute it
>> under certain conditions; see the file COPYING for details
>>
>> loading driver ..
>> creating alsa driver ...
>> hw:0|hw:0|1024|2|48000|0|0|nomon|swmeter|-|32bit
>> control device hw:0
>> configuring for 48000Hz, period = 1024 frames, buffer = 2 periods
>> Couldn't open hw:0 for 32bit samples trying 24bit instead
>> Couldn't open hw:0 for 24bit samples trying 16bit instead
>>
>> localhost kdag # fluxus &
>> [2] 7136
>> localhost XXXX # Welcome to fluxus
>> unknown source port in attempted connection []
>> JackClient::ConnectInput: cannot connect input port [] to [In0]
>> subgraph starting at fluxus timed out (subgraph_wait_fd=9, status = 0,
>> state = T
>> riggered)
>>
>>
>> **** alsa_pcm: xrun of at least 476.840 msecs
>>
>>
>> tx for any tip for debugging this.
>> /alejo
>>
>>
>>
>> ----- original message --------
>>
>> Betreff: [fluxus] 0.11osx-rc2
>> Gesendet: Tue, 05 Sep 2006
>> Von: "Artem Baguinski" <artm at v2.nl>
>>
>> > hi all
>> >
>> > osx binary release candidate 2 is available at:
>> > http://www.artm.org/pub/fluxus/Fluxus-0.11osx-rc2.dmg
>> >
>> > please test
>> >
>> > the only difference is that it doesn't require glew from Darwin Ports
>> > - I was wrong about ode, it only comes in static falvour.
>> >
>> > i'm especially interested in reports from people not using darwin
>> ports.
>> >
>> > cheers,
>> > artm
>> >
>>
>> --- original message end ----
>>
>
>