[fluxus] gentoo jackd nogo

[glauber alex dias prado]

as far as i understand it is working, have you tried using qjackctl to
check input/output ports?

On Wed, 2006-09-06 at 23:13 +0200, ad al wrote:
> hola!
> 
> trying here to use the latest version of this beloved software ;) but i have some problem with jack but im not sure what to do:
> 
> localhost XXXX #  jackd -d alsa &
> [1] 7133
> jackd 0.99.0
> Copyright 2001-2003 Paul Davis and others.
> jackd comes with ABSOLUTELY NO WARRANTY
> This is free software, and you are welcome to redistribute it
> under certain conditions; see the file COPYING for details
> 
> loading driver ..
> creating alsa driver ... hw:0|hw:0|1024|2|48000|0|0|nomon|swmeter|-|32bit
> control device hw:0
> configuring for 48000Hz, period = 1024 frames, buffer = 2 periods
> Couldn't open hw:0 for 32bit samples trying 24bit instead
> Couldn't open hw:0 for 24bit samples trying 16bit instead
> 
> localhost kdag # fluxus &
> [2] 7136
> localhost XXXX # Welcome to fluxus
> unknown source port in attempted connection []
> JackClient::ConnectInput: cannot connect input port [] to [In0]
> subgraph starting at fluxus timed out (subgraph_wait_fd=9, status = 0, state = T 
> riggered)
> 
> 
> **** alsa_pcm: xrun of at least 476.840 msecs
> 
> 
> tx for any tip for debugging this.
> /alejo
> 
> 
> 
> ----- original message --------
> 
> Betreff: [fluxus] 0.11osx-rc2
> Gesendet: Tue, 05 Sep 2006
> Von: "Artem Baguinski" <artm at v2.nl>
> 
> > hi all
> > 
> > osx binary release candidate 2 is available at:
> > http://www.artm.org/pub/fluxus/Fluxus-0.11osx-rc2.dmg
> > 
> > please test
> > 
> > the only difference is that it doesn't require glew from Darwin Ports
> > - I was wrong about ode, it only comes in static falvour.
> > 
> > i'm especially interested in reports from people not using darwin ports.
> > 
> > cheers,
> > artm
> > 
> 
> --- original message end ----
>